Ethernet Physical Layer

The Ethernet physical layer is the physical layer component of the Ethernet standard.

The Ethernet physical layer evolved over a considerable time span and encompasses quite a few physical media interfaces and several magnitudes of speed. The speed ranges from 3 Mbit/s to 10 Gbit/s in speed while the physical medium can range from bulky coaxial cable to twisted pair to optical fiber. In general, network protocol stack software will work identically on most of the following types.

The following sections provide a brief summary of all the official Ethernet media types (section numbers from the IEEE 802.3-2002 standard are parenthesized). In addition to these official standards, many vendors have implemented proprietary media types for various reasons—often to support longer distances over fiber optic cabling.

Many Ethernet adapters and switch ports support multiple speeds, using autonegotiation to set the speed and duplex for the best values supported by both connected devices. If auto-negotiation fails, a multiple speed device will sense the speed used by its partner, but will assume half-duplex. A 10/100 Ethernet port supports 10BASE-T and 100BASE-TX. A 10/100/1000 Ethernet port supports 10BASE-T, 100BASE-TX, and 1000BASE-T.